Air User :: Hi-Line Industries Ltd, Air treatment service department


	What next? Request further Information Visit Website Send to friend Hi-Line Industries Ltd company's profile

Click to visit http://www.domnickhunter.com/

Air treatment service department
September 07th 2010

The service department operated by Hi-line Industries employs experienced personnel, dedicated to their own range of compressed air treatment products, but also trained on competitors equipment. This enables them to provide a discrete third party support to compressor companies and other OEM’s. Many Hi-line products are sold ‘unbranded’ for incorporation into compressed air equipment packages offered by other manufacturers and suppliers. For these companies, Hi-line can provide maintenance, servicing and spares back-up, covering their own and competitors equipment, while their engineers use overalls, vehicles and service reports that are un-liveried.

Typical service operations undertaken for Hi-line equipment include:

• Compressed air dryers – checking both refrigerant and desiccant

• Dryer maintenance packages

• Air treatment – total care agreements

• Air dryer dewpoint control including retrofitting AEMS (automatic energy management systems) to any make of dryer

• Updating dryer control panels from analogue to digital or touch screen

• All makes of adsorption and refrigerant dryers repaired and serviced, including desiccant changes

All the service engineers are ACRIB registered (www.acrib.org.uk) with approvals as a safe refrigerant handlers. Hi-line are also a REFCOM accredited company (www.refcom.org.uk) working in association with DEFRA and Department of Environment, with a company registration scheme operating to higher standards than those stipulated in the F-Gas Regulations.

Whatever the service requirements, Hi-line have trained, well presented and qualified engineers to support their own and competitors compressed air treatment equipment. Typical additional operations include:

• Energy audits – compressed air flow analysis

• Breathing air analysis and certification

• Gas generation and separation

• Air handling units and modified atmospheres

• Condensate separator maintenance

• Compressor data logging with iTack

• Vessel and receiver inspection and pressure certification

• Filter element replacement

• Dewpoint measurement

• Pipework installations and modifications

• Hygiene stainless steel pipework by coded welders

• Vacuum systems

• Leak surveys

More articles from Hi-Line Industries Ltd:

Point of use dryers compact and cost effective (16th May 2012)

The HPD range of ‘point of use dryers’ from Hi-line Industries are compact and cost effective and feature a ‘minimum downtime’ cartridge change. They are ideally suited for remote installations, or wherever there may be only limited access available.

From 2012

Manufacturing increase at Hi-line (27th February 2012)

Hi-line Industries, manufacturers of compressed air treatment, conditioning and purification equipment, has strengthened its in-house technical team.

From 2012

Reliable compressed air drying (20th October 2011)

HI-LINE has re-engineered its proven membrane dryer. The outcome is a technologically superior product which will set new standards in membrane drying with regard to energy efficiency, says the firm.

From 2011

Nitrogen matched to site demands (25th August 2011)

The Nitrogen generators available from Hi-line Industries can be matched to individual site demand requirements.

From 2011

AIR DRYERS- Low Carbon Technology (12th August 2011)

Hi-line Industries innovative range of air treatment products offer the customer the lowest possible running costs available. Whether is filters or dryers all Hi-line products are designed and built with energy consumption at the forefont. If you are offering a solution to air treatment then all types of drying should be considered for the most energy efficient solution to the application.

From 2011

ICE COLD – RED HOT @ Hi-line (17th May 2011)

Hi-line Industries as part of their on-going market launch of the latest CDA dryer range are offering "FREE BBQ’S IN JUNE"

From 2011

Nitrogen generators show value for money (18th February 2011)

Energy efficient Nitrogen Generators from Hi-line are providing UK manufacturing with value for money engineering solutions, says the company.

From 2011

Raise a glass to new dryer range (22nd November 2010)

Hi-line Industries is releasing its new CDA range of refrigeration air dryers into the UK market. The current range of Arctic Air Dryers will be superseded in January 2011.

From 2010

Compressed Air Filters HIGH on Quality – LOW on Cost (1st July 2010)

The new range of compressed air filter housings have been designed with economy and efficiency in mind. The removal of oil, water, particulates and gaseous aerosols from compressed air systems is achieved by using a range of high performance "pleated" filtration elements.

From 2010

Economic replacement filters (10th May 2010)

From 2010

Hi-Line management team expanded (22nd February 2010)

Hi-line Industries welcome Kevin Morris as its business development manager which will enable the company to provide major customers with a more personalised service...

From 2010

Heatless pressure swing adsorption dryers (22nd February 2010)

A full range of HPS (heatless pressure swing) adsorption dryers for compressed air systems are available from Hi-line Industries, designed with ‘plug and play’ installation and high efficiency and reliability...

From 2010

Low carbon industrial chillers (1st December 2009)

Liquid Chillers from the ‘Hi-Cool’ range have been made to the energy efficient demands of modern process industry, where the production of chilled water or other liquids is required at the lowest energy cost...

From 2009

Reliable condensate removal (3rd September 2009)

The most important feature of a condensate drain should be reliability. The new Hi-line Timer Drain has a 4mm orifice inside the drain valve that allows particles through the valve along with the condensate, thus reducing the chances of debris blocking it...

From 2009

Compressed Air Filters HIGH on Quality – LOW on Cost (10th August 2009)

The new range of compressed air filter housings have been designed with economy and efficiency in mind

From 2009

Point of use dental dryers (9th June 2009)

The new Hi-Zorb range of ‘Point of Use’ adsorption dryers has taken a stronghold in the dental marketplace...

From 2009

High efficiency/low cost filter housings (15th February 2009)

The new range of compressed air filters from Hi-line has been designed with economy and efficiency in mind...

From 2009

Hi-line ‘Zero loss’ Desiccant Air Dryers (11th November 2008)

The latest version of the Hi-line ZL-HBP desiccant air dryer has been given the green light for energy efficiency...

From 2008

High quality low cost refrigeration air dryers (19th August 2008)

The current range of Hi-line 'Energy Saver' fridge dryers has been developed further. From September the new range of Fridge Dryers will include a highly equipped product with Digital Dewpoint meters fitted to all models to measure air quality...

From 2008

Hi-line – Compressed Air Dryers and Filters (1st July 2008)

The latest range of desiccant compressed air dryers from Hi-line are the most cost effective dryer in the market place.

From 2008

Point of use desiccant dry air (19th May 2008)

Dry air at point of use need not be expensive anymore. Usually, it’s better to treat the air locally to the required dewpoint, rather than the expense of drying all the sites air. HI-ZORB from Hi-line now makes that process much more affordable...

From 2008

Low Cost Nitrogen Generators (5th February 2008)

We all know that nothing is for free, and they haven’t yet taxed the air we breathe!

From 2008

Seal of REFCOM approval (31st October 2007)

Hi-line Industries says it is the first Refrigerant Air Dryer supplier to be REFCOM (Register of Companies Competent to Handle Refrigerants) approved...

From 2007

Is your Air Dryer Service company compliant with latest regulations? (2nd August 2007)

The European Union’s F-gas Regulation No 842/2006 which became law last year imposes obligations on operators of this equipment from 4 July 2007...

From 2007

Hi-line – Compressed Air Dryers and Filters (27th July 2007)

Hi-line Industries are dedicated to the design and manufacture of adsorption dryers. Whatever the customers requirements or parameters a cost efficient dryer is available.

From 2007

Lowest possible running costs? (20th April 2007)

Hi-Line says its air dryers are the most energy efficient compressed air dryers available...

From 2007

Hi-line Compressed Air Dryers and Filters (27th July 2006)

Hi-line Industries are dedicated to the design and manufacture of adsorption dryers. Whatever the customers requirements or parameters a cost efficient dryer is available.

From 2006

Putting the squeeze on compressed air costs (1st July 2005)

With energy prices on the rise and huge savings there for the taking,Mark Allinson of ABB argues that the time has come to take control of compressed air Wasting compressed air is like watching money go up in smoke. People too often treat compressed

From News

Hi-line – Compressed Air Dryers and Filters (1st July 2005)

THE ULTIMATE COMPRESSED AIR DRYER Hi-line Industries are dedicated to the design and manufacture of adsorption dryers. Whatever the customers requirements or parameters a cost efficient dryer is available.

From 2005