Domnick Hunter (2nd August 2016)

Filters

From 2005

Performance compressed air drying (27th July 2016)

Performance compressed air drying: Filters, Dryers

From 2006

The most energy efficient compressed air filters in the world (27th July 2016)

www.domnickhunter.com

From 2006

Easy access to effective compressed air treatment solutions for rail operators (9th December 2011)

Parker domnick hunter, a division of Parker Hannifin, the global leader in motion and control technologies, has published a series of eight brochures about compressed air treatment solutions for rail operators, rolling stock manufacturers and re-furbishers.

From 2011

Compressed air for point of use (13th October 2011)

The PNEUDRI MiDAS compressed air dryer range from Parker domnick hunter provides many benefits for users with terminal applications and requiring flow rates up to 54m3/hr.

From 2011

Compressed air drying solutions for every application (12th August 2011)

Moisture is the major culprit found in all compressed air systems and occurs because atmospheric water vapour, drawn in by the compressor, cools and condenses into water.

From 2011

Are all compressed air filters the same? (12th August 2011)

The origins of modern compressed air filtration can be traced back to domnick hunter in 1963, the first company to use microfibre filter media for purification applications, changing the compressed air industry forever.

From 2011

Air quality standard exceeded (12th April 2011)

Coalescing filters are generally considered to be one of the most important items of purification equipment in a compressed air system, as they remove aerosols of water and oil, while eradicating solid particulates and micro-organisms.

From 2011

Escaping air:Major drain on resources (1st March 2011)

Escaping air is often the biggest single source of wasted

From 2011

Energy savings promised (18th February 2011)

A new technical brochures from Parker details
energy saving compressed air treatment solutions.

From 2011

Why compromise air quality for the cost of a filter element? (1st November 2010)

Richard Moore, at Parker Hannifin’s domnick hunter Industrial division, looks at the importance of selecting compressed air filtration for both air quality and lifetime operating cost, rather than just initial purchase cost

From 2010

Annual filter element replacement is vital (7th September 2010)

One of the questions most frequently asked by compressed air users is, without doubt, “Why should I replace my filter elements annually?” Parker gives the answer...

From 2010

Effective compressed air filters are vital for machine performance (1st July 2010)

Using a combination of oil flooded screw compressors and high efficiency filtration has become well established and accepted over the years, with many critical industries, including food and beverage, pharmaceutical and medical, all utilising this high quality, low cost solution.

From 2010

Can high performance air dryers be environmentally friendly? (1st July 2010)

As the most prolific contaminant in compressed air systems, it is vital to ensure that all viable water vapour is removed using air dryers before it can enter a pneumatic system. Indeed, if not removed, moisture will cause corrosion of the distribution system,blocked or frozen valves and machinery, as well as providing an ideal breeding ground for micro-organisms and bacteria

From 2010

PNEUDRI MX (10th August 2009)

The world s most advanced modular drying system

From 2009

Why should I change my compressed air filter element? (12th June 2009)

Today, many manufacturers offer filtration products for the purification of contaminated compressed air, with many being selected based only on their initial purchase cost, with little or no regard for the air quality they provide or their lifetime cost of operation.

From 2009

Buying ‘green’ can boost your cash flow (16th February 2009)

As part of the government Enhanced Capital Allowance ( ECA ) scheme, Parker domnick hunter energy saving compressed air drying products complete with Dewpoint Dependent Switching (DDS) have been added to the Energy Technology List ( ETL ) with effect from December 1st, 2008...

From 2009

A modern and energy efficient approach to compressed air drying (10th November 2008)

The PNEUDRI range uses a single, high tensile aluminium extruded section, and is of modular design which eliminates the need for complex valves or interconnecting pipework. More importantly, the length to diameter ratio of the internal voids has been selected so that the dryer, which can operated at pressures up to 13 bar g (190 psig), avoids the requirement for insurance inspection due to its non-welded construction...

From 2008

Reduce your compressed air system carbon footprint (18th August 2008)

For a limited period, only in the UK, Parker domnick hunter is fitting its Dewpoint Dependent Switching (DDS) energy management system free of charge on all new orders for PNEUDRI MIDIPLUS, MX heatless and DH heat regenerative compressed air dryers...

From 2008

High efficiency compressed air dryers (1st July 2008)

PNEUDRI dryers provide a simple and cost effective solution for clean dry compressed air.

From 2008

High efficiency compressed air filters (1st July 2008)

The worlds first range of ISO12500 compliant filters are the most energy efficient compressed air filters in the world.

From 2008

Reduce your system's carbon footprint (19th May 2008)

Inclusion of domnick hunter's Dewpoint Dependent Switching (DDS) energy management system ensures the power consumed is directly proportional to the amount of water vapour entering the dryer...

From 2008

Reduce your system's carbon footprint (7th February 2008)

For a limited period, only in the UK, domnick hunter is fitting its Dewpoint Dependent Switching (DDS) energy management system free of charge on all new orders for Pneudri MidiPlus MX heatless and MAXI heat regenerative desiccant dryers...

From 2008

Complies with latest standards (7th November 2007)

Leading manufacturer of compressed air treatment equipment, Parker domnick hunter, offers a one-stop breathable air solution which complies with latest standards...

From 2007

ISO 12500 – simplifying compressed air filter selection (7th November 2007)

Mark White, product manager of domnick hunter - a division of Parker Hannifin explains what to look for when benchmarking compressed air purification products...

From 2007

Oil is not what it seems... (10th August 2007)

Mark White, product manager – Industrial Compressed Air,Parker domnick hunter dispels the myth about compressed air contamination...

From 2007

High Efficiency Compressed Air Dryers (27th July 2007)

PNEUDRI DRYERS PROVIDE A SIMPLE AND COST EFFECTIVE SOLUTION FOR CLEAN DRY COMPRESSED AIR

From 2007

High Efficiency Compressed Air Filters (27th July 2007)

THE WORLD’S FIRST RANGE OF ISO12500 COMPLIANT FILTERS ARE THE MOST ENERGY EFFICIENT COMPRESSED AIR FILTERS IN THE WORLD.

From 2007

Energy saving advice (26th July 2006)

Most companies are now facing increased energy bills,however you may be surprised by how much energy costs are actually increasing, some companies will soon see increases of 70% or more.

From 2006